NISSAN 2009 Murano - Manual (Page 45)

Black plate (47,1)
Model "NAV2-N" EDITED: 2008/ 10/ 6
7. You can confirm the list by scrolling the
screen using the up and down switches of
the main directional buttons or the center
dial.
8. Press <BACK> to return to the previous
screen.
For further details about the displayed command
list, refer to section 9.
“Command List” (page 9-34)
Before starting
To get the best recognition performance out of
NISSAN Voice Recognition, observe the follow-
ing:
. The interior of the vehicle should be as quiet
as possible. Close the windows to eliminate
the surrounding noises (traffic noise and
vibration sounds, etc.), which may prevent
the system from correctly recognizing the
voice commands.
. Wait until the tone sounds before speaking a
command. Otherwise, the command will not
be recognized properly.
. Speak in a natural conversational voice
without pausing between words.
. If the air conditioner is set to “Auto”, the fan
speed is automatically lowered so that your
commands can be recognized more easily.
Voice command examples
To use the voice recognition function, speaking
one command is sometimes sufficient, but at
other times it is necessary to speak two or more
commands.
As examples, some additional basic operations
by voice commands are described here.
Example 1: Switching the map to the Plan
View mode:
1. Push <TALK> located on the steering
switch.
2. The system announces, “Please say a
command”.
3. After the tone sounds and the icon on the
screen changes from [ ] to [ ], speak
Getting started 2-39