NISSAN 2009 Murano - Manual (Page 177)

Black plate (185,1)
Model "NAV2-N" EDITED: 2008/ 10/ 6
dial.
Voice recognition settings:
The available settings of the voice recognition
system are described.
1. Highlight [Voice Recognition Settings] and
push <ENTER>.
2. You can confirm the page by scrolling the
screen using the up and down switches of
the main directional buttons or the center
dial.
Using the system
Initialization:
When the ignition switch is pushed to the ON
position, NISSAN Voice Recognition is initia-
lized, which takes a few seconds. When
completed, the system is ready to accept voice
commands. If <TALK> is pushed before the
initialization completes, the display will show the
message: “Phonetic data downloading. Please
wait.”
Before starting
To get the best recognition performance from
NISSAN Voice Recognition, observe the follow-
ing:
. The interior of the vehicle should be as quiet
as possible. Close the windows to eliminate
the surrounding noises (traffic noise and
vibration sounds, etc.), which may prevent
the system from correctly recognizing the
voice commands.
. Wait until the tone sounds before speaking a
command.
. Speak in a natural conversational voice
without pausing between words.
. If the air conditioner is set to “Auto”, the fan
speed is automatically lowered so that your
commands can be recognized more easily.
Giving voice commands
Murano
Armada and Pathfinder
Voice recognition 9-5