NETGEAR MR814v2 - Manual (Page 24)

Reference Manual for the MR814v2 Cable/DSL Wireless Router
2-4 Connecting the Router to the Internet
Connecting the MR814v2 to Your LAN
This section provides instructions for connecting the MR814v2 router. Also, the MR814v2
Resource CD included with your router contains an animated Installation Assistant to help you
through this procedure.
Procedure: Connecting the Router
There are three steps to connecting your router:
1. Connect the router to your network
2. Log in to the router
3. Connect to the Internet
Follow the steps below to connect your router to your network. You can also refer to the Resource
CD included with your router which contains an animated Installation Assistant to help you
through this procedure.
1. Connect the router to your network.
a. Turn off your computer and Cable or DSL Modem.
b. Disconnect the Ethernet cable (A) from your computer which connects to your cable or
DSL modem.
Figure 2-1: Disconnect the cable or DSL Modem
Cable or DSL modem
A