Configuring services blocking by ip address range, Scheduling when blocking will be enforced, Scheduling when blocking will be enforced -5 – NETGEAR MR814v2 User Manual
Page 53
Reference Manual for the MR814v2 Cable/DSL Wireless Router
Content Filtering
4-5
Configuring Services Blocking by IP Address Range
Under “Filter Services For”, you can block the specified service for a single PC, a range of PCs
(having consecutive IP addresses), or all PCs on your network.
Scheduling When Blocking Will Be Enforced
The MR814v2 router allows you to specify when blocking will be enforced. The Schedule menu is
shown below:
Figure 4-4: Schedule menu
•
Use this schedule for blocking content. Check this box if you wish to enable a schedule for
Content Filtering. Click Apply.
•
Days to Block. Select days to block by checking the appropriate boxes. Select Everyday to
check the boxes for all days. Click Apply.
•
Time of Day to Block. Select a start and end time in 23:59 format. Select All day for 24 hour
blocking. Click Apply.
Be sure to select your Time Zone in the E-Mail menu.