NETGEAR MR814v2 - Manual (Page 27)

Reference Manual for the MR814v2 Cable/DSL Wireless Router
Connecting the Router to the Internet 2-7
A login window shown below opens:
Figure 2-5: Login window
3. Connect to the Internet
Figure 2-6: Setup Wizard
a. You are now connected to the router. If you do not see the menu above, click the Setup
Wizard link on the upper left of the main menu.
b. Click Next and follow the steps in the Setup Wizard for inputting the configuration
parameters from your ISP to connect to the Internet.
Note: If you choose not to use the Setup Wizard, you can manually configure your
Internet connection settings by following the procedure
“Manually Configuring Your
Internet Connection” on page 2-13 .
Unless your ISP automatically assigns your configuration automatically via DHCP, you
will need the configuration parameters from your ISP as you recorded them previously in
“Record Your Internet Connection Information” on page 2-3 .