Nikon Coolpix P90 - Manual (Page 139)

127
Shooting Options: The Shooting Menu
S
h
ooti
n
g
, Pl
ay
ba
ck an
d S
e
tup
M
e
nus
Functions that Cannot be Applied Simultaneously
Restrictions apply to the following settings in
A, B, C, D, E and F modes.
Flash mode
• Flash mode is disabled (W) when B (infinity) is selected for focus mode,
Continuous, BSS, or Multi-shot 16 is selected for Continuous, or when any
mode other than Off is enabled for Auto bracketing.
• Applied setting is restored when any mode other than B (infinity) is selected for
focus mode, Single or Intvl timer shooting is selected for Continuous, or Off is
selected for Auto bracketing.
Self-timer/Smile timer/Blink proof
• If self-timer, a (smile timer) or y (blink proof ) is set, Continuous will be set to
Single, and Auto bracketing will be set to Off.
• The Continuous and Auto bracketing settings are restored when self-timer , a
(smile timer) or y (blink proof ) is disabled, (or when shooting with the self-timer
or smile timer has finished).
• For shooting modes A, B, C, D, E and F, blink proof cannot be used if B&W
+ color is enabled for the Black-and-white option of Optimize image.
Focus mode
• When a (smile timer) or y (blink proof ) is set while the focus mode setting is set
to B (infinity), p (macro close-up) or E, the focus mode setting will be changed
to A.
• When Face priority is selected for AF area mode, setting focus mode to B
(infinity) changes the AF area mode setting to Auto. Selecting an option other
than B (infinity) for focus mode restores the AF area mode setting to Face
priority.
Optimize image
• White balance is automatically set to Auto when Black-and-white is selected
for Optimize image. The last White balance setting applied is restored when
any setting other than Black-and-white is selected for Optimize image.
• Enabling the B&W + color option for the Black-and-white item in the Optimize
image menu changes the Continuous setting to Single and the Auto
bracketing setting to Off. These Continuous and Auto bracketing settings do
not change even when the B&W + color option is disabled.
• When an option other than Off is selected for Active D-Lighting, the Contrast
option in the Custom and Black-and-white
➝ Custom settings will be changed
to Auto.