Nikon LS-2000 - Manual (Page 55)

- 55 - Specifications
SA-20 S
TRIP
F
ILM
A
DAPTER
Film: 35 mm film strips of two to six frames (film
must be flat or curl towards the emulsion
surface not more than 3 mm, be free from
adhesive tape, have all perforations intact, and
be cut straight across)
Operating mode: Connected directly to the connector at rear
of scanner adapter slot
Dimensions: 68.0 mm (W)
×
206.0 mm (D)
×
54.5 mm
(H) (2.68
″ Ч
8.11
″ Ч
2.14
″
)
Weight: Approx. 200 g (7.1 oz.)
Power supply: 5 VDC, 0.2 A, 15.5 V, 0.7 A or less, supplied
from LS-2000
IA-20 IX240 adapter (option)
Film: Developed IX240 film cartridge
Operating mode: Connected directly to the connector at rear
of scanner adapter slot
Dimensions: 84.0 mm (W)
×
207.5 mm (D)
×
58.5 mm
(H) (3.31
″ Ч
8.17
″ Ч
3.30
″
)
Weight: Approx. 270 g (9.6 oz.)
Power supply: 5 VDC, 1.7 A or less, supplied from LS-2000
SF-200 slide feeder (option)
Film: 35 mm slide mount of 1.0 mm to 3.2 mm in
thickness
Maximum number of slides:
Approx. 50 slides with mounts 1.5 mm in
thickness
(Housing space: Approx. 78.5 mm)
Operating mode: LS-2000 installed on its base, SF-200 con-
nected directly to the connector at rear of
LS-2000 adapter slot
Dimensions: 142.0 mm (W)
×
324.7 mm (D)
×
85.3 mm
(H) (5.59
″ Ч
12.78
″ Ч
3.36
″
)
Weight: Approx. 770 g (1 lb 11.5 oz.)
Feed/eject time (reference):
Feed: approx. 6 seconds per slide
Eject: approx. 6 seconds per slide
Power supply: 5 VDC, 0.7 A or less, supplied from LS-2000