Nlynx Wireless Gateway - Manual (Page 28)

28
TCP Port to IP Forwarding
This is a table of up to sixteen entries. A list of standard, commonly used TCP
port numbers appears next to the table to help you create entries. Each entry
consists of (1) the port number for the protocol on which a particular
network-based service is based, and (2) the IP address of the server on your
LAN that will provide that service to machines outside the LAN.
To create an entry, fill in the TCP port number and type in the fourth number
of the local IP address associated with it (the first three numbers are
automatically set to those of the Wireless Gateway's Local LAN address; see
“Broadband Router” under “Basic Setup,” above).
To remove an entry, set the TCP port number or the local IP address, or both,
to zero.