Nlynx Wireless Gateway - Manual (Page 32)

32
to specify a range, click the Start Port box and type the lowest number of the
range, and then click in the End Port box and type the highest number.
The Add button is for sending the displayed I/O, Start Port, and End Port
settings to the Wireless Gateway for storage in non-volatile memory. Once an
entry has been added, it will appear in the drop-down list box titled (I/O, Start
Port, End Port). You can repeat the process as many times as necessary to
store complete port usage information for an application.
The Delete button is used in conjunction with the drop-down list box (I/O,
Start Port, End Port) to remove port usage settings previously saved in the
non-volatile memory. (Note that in some browsers, the list box appears only
after I/O, Start Port, and End Port settings have been saved with the Add
button.) To delete an unwanted triplet of settings in (I/O, Start Port, and End
Port), simply select those settings from the drop-down list and then click
Delete.