Nortel Networks COOLPIX S5100 - Manual (Page 149)

137
Setup Menu
Basi
c Came
ra Setup
Blink Warning
Specify whether or not the camera detects human subjects that have blinked
using face detection (
A 47) when shooting in the following modes.
• A (auto) mode (when
Face priority (A 45) is selected for AF area mode
option).
•
Scene auto selector (A 52), Portrait (A 54), or Night portrait (A 55)
scene mode is selected.
d button M z (Setup menu) (A 121) M Blink warning
On
When the camera detects that one or more human subjects may have blinked in an
image captured using face detection, the
Did someone blink? screen is displayed
in the monitor.
The face of the human subject that may have blinked when the shutter was
released is framed by a yellow border. Should this occur, check the image and
determine whether or not another image should be captured.
See “Operating the Blink Warning Screen” (
A 138) for more information.
Off (default setting)
Blink warning is not enabled.
B
Note on Blink Warning
The blink warning does not function at continuous settings of
Continuous, BSS, or Multi-shot 16.