Nortel Networks COOLPIX S5100 - Manual (Page 29)

17
Charging the Battery
First Ste
p
s
Turning On and Off the Camera
Press the power switch to turn on the camera. The
power-on lamp (green) will light, and then the monitor
will turn on (the power-on lamp turns off when the
monitor turns on). To turn off the camera, press the
power switch again. When the camera is turned off, the
power-on lamp and the monitor will turn off.
• If the camera is turned off, hold down the
c button
to turn the camera on in playback mode (
A 28).
C
Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will blink. If no operations are performed for another three minutes,
the camera will turn off automatically.
When the power-on lamp is blinking, pressing any of the following buttons will turn the monitor
back on.
➝ Power switch, shutter-release button, A button, c button, or b (movie-record) button
• In shooting or playback mode, the camera will enter standby mode in about one minute (default
setting).
• The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option (A 133) in the setup menu (A 120).