Nortel Networks COOLPIX S5100 - Manual (Page 168)

156
Troubleshooting
Te
ch
n
ical
No
te
s an
d I
n
de
x
Cannot use quick retouch,
D-Lighting, skin softening,
small picture, or crop.
• These options cannot be used with movies.
• These options cannot be used with images
captured at an
Image mode setting of P
3968 × 2232.
• Select images that support quick retouch,
D-Lighting, skin softening, small picture, or crop.
• Camera is unable to edit images captured
with other cameras.
106
37
94
94
Images not displayed on
television.
• Select the correct
Video mode in the setup
menu.
• Memory card contains no images. Replace the
memory card. Remove the memory card to
play back images from the internal memory.
135
20
The saved images are not
displayed in auto sort mode.
• The desired image was sorted to a category
other than the category currently displayed.
• Images saved by a camera other than the
COOLPIX S5100 and images copied using the
Copy option cannot be displayed in auto sort
mode.
• Images saved in the internal memory or on
the memory card may not be played back
correctly if overwritten by a computer.
• Up to 999 images and movies in total can be
added to each category. If the desired
category already contains 999 images or
movies in total, new images or movies cannot
be added.
78
79
–
79
Nikon Transfer 2 does not start
when camera is connected.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm system requirements.
• Computer is not set to start Nikon Transfer 2
automatically.
For more information on Nikon Transfer 2,
refer to help information contained in ViewNX
2.
17
22
109
–
108
112
The PictBridge startup screen is
not displayed when the
camera is connected to a
printer.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed
and it may be impossible to print images when
Auto is selected for the Charge by computer
option in the setup menu. Set the
Charge by
computer option to Off and reconnect the
camera to the printer.
136
Problem Cause/Solution A