National Instruments Two-Slot Embedded Controller NI PXI-8183 - Manual (Page 34)

Chapter 3 I/O Information
© National Instruments Corporation 3-3 NI PXI-8183 User Manual
VGA
Figure 3-2 shows the location and pinouts for the VGA connector on
the NI PXI-8183. Table 3-2 lists and describes the VGA connector signals.
AMP manufactures a mating connector with part numbers 748364-1
(housing) and 748333-2 (pin contact).
Figure 3-2. VGA Connector Location and Pinout
Table 3-2. VGA Connector Signals
Pin Signal Name Signal Description
1 R Red
2 G Green
3 B Blue
4 NC Not Connected
5 GND Ground
6 GND Ground
7 GND Ground
8 GND Ground
9 +5V 5 V
10 GND Ground
VGA
11 6 1
15 10 5
NI PXI-8183 Embedded Controller