National Instruments Two-Slot Embedded Controller NI PXI-8183 - Manual (Page 50)

Chapter 4 Common Configuration Questions
NI PXI-8183 User Manual 4-8 ni.com
How do I flash a new BIOS?
For information on updating the BIOS, refer to KnowledgeBase
2GIGKD0Z at
ni.com/support .
Where do I get the latest software drivers?
You can download the latest drivers from ni.com/support/
pxisupp.htm .
My NI PXI-8183 does not have an internal floppy drive. Is there a way
to use an external drive?
Yes. The NI PXI-8183 controllers support and can boot from USB floppy
drives. Refer to the
Boot Options section for more information.
A USB floppy drive is available from National Instruments, part number
778492-02.
The LPT port on the NI PXI-8183 also can be configured through the
BIOS setup for floppy signals instead of LPT signals. Refer to Chapter 3,
I/O Information , for the floppy drive pinout.
PXI Configuration
How do I use the SMB trigger on the front panel?
For details, refer to the PXI Features section of Chapter 2, Installation and
Configuration .
Why doesn’t the NI PXI-8183 work with the PXI-8220?
A serialized IRQ conflict with the PXI-8220 and the NI PXI-8183 prevents
PC cards using ISA interrupts from working with the NI PXI-8183
controllers. The PXI-8221 is designed to work with the NI PXI-8183 and
should be used instead.