Upgrade information, Upgrade information -7 – National Instruments Two-Slot Embedded Controller NI PXI-8183 User Manual

Page 49

Advertising
background image

Chapter 4

Common Configuration Questions

© National Instruments Corporation

4-7

NI PXI-8183 User Manual

Upgrade Information

How do I upgrade system memory?

You can change the amount of installed RAM on the NI PXI-8183 by
upgrading the SO-DIMM.

To upgrade the RAM, remove the NI PXI-8183 from the PXI chassis.
Remove the old SO-DIMM module and install the new SO-DIMM in the
socket as shown in Figure 4-3.

National Instruments offers the following types of SO-DIMMs for use with
the NI PXI-8183 controller.

256 MB, 32 MB

× 64, 7.5 ns, 1.05 in. max

512 MB, 64 MB

× 64, 7.5 ns, 1.05 in. max

Note

National Instruments has tested and verified that the SO-DIMMs we sell work with

the NI PXI-8183. We recommend you purchase your SO-DIMM modules from National
Instruments. Other off-the-shelf SO-DIMM modules are not guaranteed to work properly.

Figure 4-3. Installing a SO-DIMM in an NI PXI-8183 Controller

1

SO-DIMM Module

2

SO-DIMM Socket

1

2

Advertising