National Instruments USB Digitizers NI USB-5133 OEM - Manual (Page 8)

NI USB-5132/5133 OEM User Guide 8 ni.com
2. Edit the device INF file by opening NIHSD2k.inf with a text editor.
At the bottom of this file are the descriptors where Windows looks to
identify the device. Locate the four lines of text that contain in quotes
the descriptors for the device name you are modifying. Change the
descriptor on all lines to the new device name, as shown in Figure 8.
Figure 8. INF File Descriptors Changed to “My Device” (Windows 2000)
3. Save and close the INF file.
4. Go to the Windows Device Manager, right-click the OEM device under
Data Acquisition Devices, and select Uninstall.
5. Power down the OEM device and disconnect the USB cable from
your PC.
Original File
Modified File