National Instruments USB Digitizers NI USB-5133 OEM User Manual
Page 9
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the Terms of Use section on ni.com/legal for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products/technology,
refer to the appropriate location: Help»Patents in your software, the patents.txt file on your
media, or the National Instruments Patent Notice at ni.com/patents.
© 2008 National Instruments Corporation. All rights reserved.
372530A-01
Aug08
When you reconnect and power on the device, it appears as
My Device
in
the Found New Hardware Wizard and Windows Device Manager, as shown
in Figure 9.
Note
When the device is initially installed, the Windows alert message may display the
following:
Found New Hardware: USB 513x
. This message appears for a few seconds
until the custom name appears and the Found New Hardware Wizard is launched. This alert
message device name cannot be changed.
Figure 9. “My Device” in the Found New Hardware Wizard and
Device Manager (Windows 2000)
Note
Modifying the INF file will not change the USB-5132/5133 OEM device name in
Measurement & Automation Explorer (MAX).