NEC MULTEOS M40 - Manual (Page 29)

English
English-25
Power Indicator
Mode Status Indicator Light
Power ON Green*
2
Power OFF (ECO STANDBY)*
Power consumption under 1W Red
Power OFF (STANDBY)
Power consumption under 4W Amber
Power Save Amber Blinking
Power Standby when
“SCHEDULE SETTINGS”
enabled Green and Amber
blink alternately
Diagnosis (Detecting faiure) Red Blinking
(See Trouble Shooting page 40)
*When in Eco Standby Mode RS-232C controls do not function.
*
2 If "OFF" is selected in POWER INDICATOR(See page 30), the LED will
not light when the LCD monitor is active mode"
Power Management
The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving func-
tion that automatically reduces the power consumption of
the display when the keyboard or the mouse has not been
used for a fixed period of time.
The power management feature on your new display has
been set to the “ON” mode. This allows your display to enter
a Power Saving Mode when no signal is detected. This could
potentially increase the lifetime of the display while power
consumption is decreased.
STANDBY mode is used when the display is connected to an
RS-232C cable or when using the INPUT DETECT function.
ECO STANDBY uses less power, but the RS-232C and
INPUT DETECT functions are not available.
Picture Size
The size of the picture can be changed depending on the
aspect ratio (4:3, 16:9, etc.) of the input signal.
Picture Mode
Choose the Picture Mode that is most suitable for the type of
content that is shown.
Standard: for images
sRGB: For text based applications.
Highbright: for moving images
Cinema: for movies
STANDARD sRGB HIGHBRIGHT
STANDARD CINEMA HIGHBRIGHT
DVI, VGA,
RGB/HV, OPTION
HDMI, DVD/HD,
VIDEO, TV
Information OSD
The Information OSD provides information such as: Moni-
tor ID, Input Source, Picture Size, etc. Press the DISPLAY
button on the remote to bring up the Information OSD.
Basic Operation
- continued
Signal Type
4:3
NORMAL SIZE RECOMMENDED SIZE
NORMAL
ZOOM
(DYNAMIC)
FULL
WIDE
Squeeze
Letterbox
DVI, VGA, RGBH/V, OPTION FULL ZOOM NORMAL
FULL WIDE ZOOM NORMAL HDMI, DVD/HD, VIDEO, TV
1 ID number assigned to current monitor* 3
2 ID number assigned monitor to be controlled via RS-232C* 4
3 Input Source
4 Audio input mode
5 Picture size
6 Input Signal Information
7 Sub picture information
*3: “IR CONTROL” should be set “Primary” or “Secondary”.
*4: “IR CONTROL” should be set “Primary”.