NEC MULTEOS M40 - Manual (Page 42)

English-38
Using the LCD with RS-232C
- continued
To control monitor or multiple monitors that are daisy-chained together please use
the control command. Instructions for the control command can be found on the CD
included with the display. The file is called “External_control.pdf ”.
1) Interface
PROTOCOL RS-232C
BAUD RATE 9600
[bps]
DATA LENGTH 8 [bits]
PARITY BIT NONE
STOP BIT 1 [bit]
FLOW CONTROL NONE
2) Control command diagram
Please see file “External_Control.pdf ” on the CD-ROM.