Nortel Networks 2002 - Manual (Page 66)

While on an active call
66
While on an active call
This section describes the following features available during an active
call:
• “Placing a call on hold” on page 66
• “Transferring a call” on page 67
• “Using Timed Reminder Recall” on page 68
• “Using Attendant Recall” on page 69
• “Using Call Park” on page 70
• “Recording a Calling Party Number” on page 72
• “Displaying incoming call information” on page 73
• “Tracing a malicious call” on page 73
Placing a call on hold
Use the hold feature if you are talking on one line and another call arrives
on a second line. Retain the original call by putting it on hold and then
answer the second call.
To place a call on hold:
To retrieve a call on hold:
Press the Hold key. The LCD indicator
flashes beside the line on hold.
Note: If Automatic Hold is enabled, the
active call is automatically put on hold
when you answer the second call.
Press the line (DN) key beside the
flashing LCD indicator.
(Hold)