Nortel Networks 2002 - Manual (Page 70)

While on an active call
70
Using Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call
from any telephone. Using Call Park does not tie up a line. If configured
network-wide, call park can be used across networks. A System Park
Extension can be configured to automatically park most calls.
To park a call on the system park DN or on your own DN:
To park a call on a DN other than the system park DN or on your own
DN:
During an active call, press the Park soft
key twice.
Note: By default, the call is parked on
your DN unless a
System Park is
enabled to automatically park calls on
the system.
1. Press the Park soft key.
2. Dial the DN where you want to park the
call.
3. Press the Park soft key.