NASA SX 35 DSC - Manual (Page 21)

SX 35 DSC 19
Priority Scan
The Priority Scan function scans the Primary Calling Channel and the last
selected working channel.
To select Priority Scan:
• Press the
SCAN
key. PSCAN appears in the upper line of the display
and the two scanned channel numbers appear alternately in the dis-
play.
INT PSCAN HI
08Dec12:05
P
N 28°04.814
W 83°42.169
INT PSCAN HI
08Dec12:05
P
N 28°04.814
W 83°42.169
Priority Scan Sequence
To exit Priority Scan:
• Press the
SCAN
key or press the 16 key.
All Scan
The All Scan function scans all channels except channel 70. Channel 70 is
the Digital Selective Calling (DSC) channel. Voice traffic is not permitted
on this channel. If noisy or busy channels interfere with scanning, the inter-
fering channels may be temporarily removed from the scan sequence.
To select All Scan:
• Press and hold the
SCAN
key for 2 seconds. ALLSCAN appears in the
upper line of the display. The scanned channel numbers appear in se-
quence in the channel number display.
To Exit All Scan:
• Press the
SCAN
key or press the 16 key.
To delete channels from the scan sequence:
• Press and hold the
ENT
key while the scan is halted on the offending
channel. Turning the transceiver Off and On, restores all channels to
the scan sequence.