NASA SX 35 DSC - Manual (Page 22)

20 SX 35 DSC
Memory Scan
Memory Scan allows the user to create and scan a bank of preferred chan-
nels. Channels may be added to or removed from the memory channel
bank as desired. Memory channels are stored individually and may be de-
leted individually, or the entire bank may be deleted. If the
PTT button is
pressed, the transceiver exits scanning and normal communication is re-
sumed.
To create or add channels to the memory channel bank:
• Press the
MEM
key. The Memory Scan channel bank appears in lower
two lines of the display. If no channels have been previously added to
the bank, the Primary Calling Channel (16) is displayed. Otherwise, up
to six channel numbers appear. A plus sign (+) at the end of the lower
line indicates more than six channels are stored in the bank. Press the
MEM key again to advance to the next page of channels. The memory
channel bank can hold all usable voice communication channels.
INT ADD/DELETE
MEM CHANNEL
16
INT ADD/DELETE
MEM CHANNEL
06 09 16
22 67 68 + INT ADD/DELETE
MEM CHANNEL
72 78
Memory Scan Bank Memory Scan Bank Memory Scan Bank
Default Page Page Full Next Page
• Rotate the SELECT knob or microphone keys to select a desired chan-
nel to add to the memory channel bank.
• Press and hold the
MEM
key for about two seconds. The selected chan-
nel is stored and the channel number appears in the memory channel
bank. Repeat the select and store process to add more preferred chan-
nels. As each channel is added, the existing channels in the bank shift as
necessary to display the new channel number in the bank.
When in the normal communication mode, as channels are selected,
MEM CHANNEL appears in the second line of the display if the se-
lected channel is stored as a memory channel.
INT 16 PRI. HI
MEM CHANNEL
N 28°04.814
W 83°42.169
Memory Channel Display