NASA SX 35 DSC - Manual (Page 24)

22 SX 35 DSC
To select a topic in the menu list:
• Rotate the SELECT knob to move the cursor
>
to the desired topic.
There are more topics than can be displayed at one time, so the list scrolls
as the cursor is advanced beyond the top or bottom of the list.
INT MMSID SET
TIME SET
NMEA SET
>DIRECTORY
More Main Menu Topics
• With the cursor on the desired menu topic, press the
ENT
key. Op-
tions or edit settings for the topic appear in the display.
• Use the SELECT knob to move the cursor to the desired setting.
• Press the
ENT
key to store the new setting.
If you change your mind:
• Before pressing the ENT key while in an editing mode, press the
MENU
key to backup to the next higher menu level.
To exit the menus and return to communication functions:
• Press the 16 key. If the ENT key was not pressed to store a new
value, no changes are made.
Main Menu Topics
DIRECTORY
The DSC Calling Directory is a list of names and corresponding MMSID’s
that you enter and store for making DSC calls (32 ID’s maximum). Entries
to the list can be added or edited as necessary to keep your directory cur-
rent.
To add a name and MMSID to the directory:
• Press the
MENU
key. The DIRECTORY topic appears in the display.
• Press the
ENT
key. If the directory is empty, the screen appears blank
except for the channel number. If previous entries appear, move the
cursor to an empty line. If no empty line is found, the directory is full
and a previous entry must be overwritten.