NASA SX 35 DSC - Manual (Page 33)

SX 35 DSC 31
• Use the SELECT knob to position the cursor on the TIME SET topic.
• Press the
ENT
key. The TIME FORMAT menu appears in the display.
INT TIME FORMAT
>12 HR.
24 HR.
88:88 +
Format Selection
• Use the SELECT knob to select the desired format, either 12 HR or 24
HR .
• Press the
ENT
key. The TIME OFFSET menu appears in the display.
INT TIME OFFSET
>+00.0
88:88
Time Offset Selection
• Use the SELECT knob to set the time difference from the Prime Merid-
ian to your location. If you are West of the Prime Meridian, select a
negative (—) value. If you are East of the Prime Meridian, select a posi-
tive (+) value. Time offset values from 0 to 12 hours plus or minus may
be entered in 1/2 hour increments. Obtain the time offset value from
your GPS navigator.
• When your selection is complete, press the
ENT
key to store the set-
ting and exit the menu.
NMEA SET
Allows NMEA sentences from navigation equipment manufactured to ear-
lier versions of the NMEA standard to provide Lat/Lon position coordi-
nates and UTC time.
• Press the
MENU
key. Menu topics appear in the display.
• Use the SELECT knob to position the cursor on the NMEA SET topic.
• Press the
ENT
key. The NMEA CHECKSUM menu appears in the
display.