NASA SX 35 DSC - Manual (Page 31)

SX 35 DSC 29
• Use the SELECT knob or the microphone keys 0~9 to enter the correct
Longitude value in degrees and minutes. When Longitude is complete,
the cursor moves to the Time entry line.
• Press
ENT
or
ENT
to move the blinking cursor to the first character in
the Time entry.
• Use the SELECT knob or the microphone keys 0~9 to enter the correct
time of day. LOC appears at the end of the Time line indicating entry
must be local time.
• Enter your local time in hours and minutes. Use 12 hour AM/PM for-
mat if a or p appear after the minutes characters. The SELECT knob or
the microphone keys 0~9 toggle the a / p setting. If neither a or p appear
in the Time line, enter your local time, hours and minutes, in 24 hour
format.
• When Lat/Lon and Time values are correct, press the
MENU
key to
return to the MANUAL LL menu page.
To turn Manual Lat/Lon On of Off:
• Use the SELECT knob to select either On or Off on the MANUAL LL
page.
• Press the
ENT
key to store the selection.
• Press the 16 key. The Main display appears. If Manual Lat/Lon is
turned On, and manually entered values are stored, the Lat/Lon values
appear in the lower two lines of the display. The
M appearing at the end
of the Longitude line indicates that Manual Lat/Lon is turned On. When
Manual Lat/Lon is turned On, the manually entered position overrides
any Lat/Lon position from a navigation receiver.
MMSID SET
Provides for entry of the 9 digit MMSI for your vessel which must be en-
tered in order to make DSC calls. MMSI must be obtained from govern-
ment communication authorities or authorized agents.
CAUTION NOTE
Only three entry attempts are permitted. A warning is displayed after the
third attempt and MMSID entry is blocked. CALL YOUR DEALER FOR
ASSISTANCE.
To enter your MMSI number:
• Press the
MENU
key. Menu topics appear in the display.