Nortel Networks Media Dependent Adapter - Manual (Page 16)

14
3. Insert the MDA into the chassis slot (see Figure 5 )
taking care to slide the MDA onto the guides
provided on the chassis.
Figure 5. Installing an MDA
4. Press the MDA firmly into the chassis slot. Be sure
that the MDA is fully seated into the mating
connector.
5. Secure the MDA in the chassis by tightening the
thumb screws on the MDA front panel.
6. Attach devices to the MDA ports (refer to the
Using the BayStack 450 Switch.
Caution: Make sure the MDA slides in on the guides
provided. Failure to align the guides could result in
bent and broken pins
8531FA