Nortel Networks Media Dependent Adapter - Manual (Page 6)

4
2 10 10BASE-T port status LEDs (green):
On: The corresponding port is set to
operate at 10 Mb/s.
Off: The link connection is bad or
there is no connection to this port.
Blinking: The corresponding port is
management disabled.
3 F Dx Full-duplex port status LEDs (green):
On: The corresponding port is in
full-duplex mode.
Off: The corresponding port is in
half-duplex mode.
4 Activity Port activity LEDs (green):
Blinking: Indicates the network
activity level for the corresponding
port. A high level of network activity
can cause LEDs to appear to be on
continuously
5 10BASE-T/100BASE-TX RJ-45 (8-pin
modular) port connectors.
Table 1. 400-4TX MDA Components (continued)
Item Label Description