Napco Security Technologies GEM-RP3DGTL - Manual (Page 26)

26
G L O S S A R Y
Following are brief descriptions of terms and features used herein that may be unfamiliar to you. Some of the features are
programmable options that may or may not apply to your particular system.
Abort Delay - A delay period that
allows the control panel to be reset,
thus aborting a report to a central sta-
tion.
Access Code - A code (up to 6 dig-
its) used to remotely unlock a door.
Ambush Code - A 2-digit code en-
tered just prior to the User Code when
forced to disarm. Sends a silent alarm
to the central station with no indication
at the keypad.
Arming/Disarming - Turning the
system on/off by entering your code at
the keypad, then pressing the
J
but-
ton.
Battery - Backup power source in
the control-panel enclosure to provide
protection in the event of a power fail-
ure.
BYPASS Button - Enables you to
manually remove one or more pro-
tective zones from the system.
Central Station - Monitors incom-
ing reports and emergency mes-
sages from a digital communicator
and notifies the proper authorities.
Chime - A keypad beep while dis-
armed alerting that the programmed
zone has been opened.
Closing Window - (Optional.) A
time interval within which closing
(arming) is permitted without report-
ing to the central station.
Communicator - Reports intru-
sions, emergencies, openings, clos-
ings, etc. directly to the central sta-
tion over telephone lines.
Control Panel - The brain of the
system, it controls all system func-
tions.
Directory - A listing of the pro-
grammed zone descriptions stored in
memory.
Easy Arming - Quick arming by
pressing the
J
button (optional).
Exit/Entry Delays - Separate delays
that let you exit and enter your
premises without setting off an alarm
when the system is armed.
Instant Protection - Arming without
entry delay using the F button
while remaining on the premises.
INTERIOR Button - Bypasses Inte-
rior Zones on arming (see Zones - In-
terior Zones).
Keypad - Puts control-panel func-
tions at your fingertips. It can be
mounted anywhere in your premises.
GEM-RP3DGTL.pub
page 26 Wednesday, August 18, 1999 14:03