Napco Security Technologies GEM-RP3DGTL - Manual (Page 5)

5
K E Y P A D C O N T R O L S & I N D I C A T O R S
Window. Window. Lights indicate
system status messages; digit display
indicates related zone, function or er-
ror message numbers.
STATUS Light. Lights (green) to indi-
cate that the system is ready for arm-
ing. If a zone is not secured, the light
will be off and the zone will display in
the window. If a zone has been by-
passed, the STATUS light will blink
while armed.
ARMED Light. Lights (red) to indicate
that the system is armed. If an alarm
has occurred, the ARMED LED will be
flashing.
FUNCTION Button. Selects available
system functions as displayed in the
window. The selected function is exe-
cuted by pressing the
J
to button or
the YES ( E ) button.
BYPASS Button. (1) Deactivates se-
lected zones from the system. (2) Un-
bypasses a bypassed zone.
RESET Button. (1) Resets various
system troubles, displays, etc. (See
text.) (2) Resets residential smoke
detectors.
Numerical Keys (1-9, 0). Used to
enter codes, zone numbers, etc.
ON/OFF Button. Entry key. Causes
the entered code or selected function
to be executed.
INTERIOR Button. (1) Bypasses all
Interior Zones simultaneously to allow
free movement within the premises.
(2) Scrolls the window display forward
(NEXT). (3) Answers “YES” to ques-
tions in the window display.
INSTANT Button. (1) Cancels entry
delay on Exit/Entry Zones, causing an
instant alarm upon violation. (2)
Scrolls window display backward
(PRIOR). (3) Answers “NO” to ques-
tions in the window display.
AREA Button (*). Selects other ar-
eas.
Emergency Buttons. Used with the
G button to signal an emergency,
as follows:
• Press the 7 and the G
buttons for Fire Emergency.
•
Press the 8 and the G
buttons for Auxiliary Emergency.
•
Press the 9 and the G
buttons for Police Emergency.
AC Light. Indicates AC Power is pre-
sent.
1
2
3
4
5
6
7
8
9
10
11
12
13
GEM-RP3DGTL.pub
page 5 Wednesday, August 18, 1999 14:03