Nortel Networks NN10300-009 - Manual (Page 30)

30 Using the Feature menu
Step Action
1 From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
2 Select a key to change.
The Feature submenu appears.
3 Select and open Assign.
If the key you selected in step 2 is assigned to a Centrex feature,
these soft key labels appear: Key Type and Autoscroll.
If the selected key is assigned to a local feature, these soft key
labels appear: Key Type and Feature.
4 Press Key Type.
The Key Type screen appears. A check mark appears beside
the type currently assigned to the key.
5 Perform one of these actions:
•
To change Central to Local, select Local.
•
To change Local to Central, select Central.
6 Press Ok.
The key type is changed and a check mark appears beside the
selection.
7 To assign a directory entry to a Local key, see “Assigning a
directory entry to a feature key” (page 30) .
--End--
Assigning a directory entry to a feature key
Follow this procedure to assign a directory entry to a feature key.
Assigning a directory entry to a feature key gives you the ability to speed
dial that number when you press the key.
Prerequisites
The feature key you select must be defined as Local, see “Defining the
key type” (page 29) .
Step Action
1 From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
2 Select the key defined as Local.
The Assign menu appears.
Carrier VoIP
Nortel IP Phone 2004 User Guide (CICM)
NN10300-009 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.