Nortel Networks NN10300-009 - Manual (Page 44)

44 Using the User menu
Step Action
1 From the main menu, open the User menu.
2 From the User menu, select and open Login Type.
The Unique screen appears. If Unique is enabled, Ok appears
above the far left soft key.
3 Press the down navigation key to view the Joint screen.
If Joint is enabled, Ok appears above the far left soft key.
--End--
Viewing, disabling, or enabling the auto login feature
Follow this procedure to view, enable, or disable the Auto Login feature.
Any maintenance activity, for example a firmware upgrade, forces a log off
from the network. If you enable auto login, you are automatically logged on
to the IP Client Manager when the terminal is available again.
Prerequisites
You must have permission to edit the auto login feature. If you have
permission, a check mark appears next to Enabled when the screen
appears.
Step Action
1 From the main menu, open the User menu.
2 From the User menu, select and open Auto Login.
The Auto Login screen appears displaying your Auto Login
profile.
If you do not have permission to edit this feature, the procedure
is complete.
3 If you have permission to edit this feature, press Ok.
The Enabled screen appears. A check mark appears if the
feature is enabled.
4 Perform one of these actions:
•
To enable Auto Login, select Enable.
• To disable Auto Login, select Disable.
5 Press Ok.
Carrier VoIP
Nortel IP Phone 2004 User Guide (CICM)
NN10300-009 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.