Nortel Networks NN10300-009 - Manual (Page 72)

72 Additional features and controls
Procedure job aid
Figure 5
Special characters
Using the directory
Follow the procedures in this section to use the directory feature.
Navigation
•
“Adding or editing a directory entry” (page 72)
• “Deleting an entry from the directory” (page 73)
• “Making a call using the directory” (page 74)
Adding or editing a directory entry
Follow this procedure to add an entry to the directory. The directory stores
a maximum of 16 entries.
Step Action
1 Press the directory key to access the directory.
The directory opens.
2 Perform one of these actions:
•
If this is a new entry, press Ok.
• If you are editing an existing entry, navigate through the list to
select the entry, then press Ok.
The Directory menu opens.
3 From the Directory menu, select and open New Entry.
The New Entry menu opens.
4 To add or edit the number, perform these steps:
a From the New Entry menu, select and open Number.
b Use the dialpad to enter the number.
c Press Ok.
Carrier VoIP
Nortel IP Phone 2004 User Guide (CICM)
NN10300-009 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.