Nortel Networks NN10300-009 - Manual (Page 41)

Resetting the default time 41
2 From the Time menu, select and open Time Format.
The Time Format screen appears.
3 Scroll through the Time Format options to select the format you
want.
A check mark appears beside the format currently in use.
4 To enable a format, select it, and press Ok.
A check mark appears beside the option to indicate that it is
enabled. The time is displayed in the selected format. You return
to the previous screen.
--End--
Setting the date format
Follow this procedure to set the date format the terminal uses to display
the current date. When month (mmm) is selected, the display shows an
abbreviated name, Oct for example, and not a number.
The date format choices are:
•
ddmmm
• mmmdd
• mm/dd
•
dd/mm
Step Action
1 From the main menu, open the Time menu.
2 From the Time menu, select and open Date Format.
The Date Format screen appears.
3 Scroll through the Date Format options to select the format you
want.
A check mark appears beside the format currently in use.
4 To enable a format, select it and press Ok.
A check mark appears beside the option to indicate our choice.
The date is displayed in the selected format. You return to the
previous screen.
--End--
Resetting the default time
Follow this procedure to reset the terminal to the default time.
Carrier VoIP
Nortel IP Phone 2004 User Guide (CICM)
NN10300-009 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.