NetComm NP2160 - Manual (Page 16)

www.netcomm.com.au Rev.1 - YML623
Page 16 16-port 10/100Mbps Fast Ethernet ProSwitch
TECHNICAL SPECIFICATION
General
Standards IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
Protocol CSMA/CD
Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full- duplex)
Topology Star
Network Cables 10BASET: 2-pair UTP Cat. 3,4,5, EIA/TIA- 568 100-ohm
STP100BASE-TX: 2-pair UTP Cat. 5, EIA/TIA-568 100-ohm STP
Number of Ports 16 x 10/100Mbps Auto-MDI ports
Physical and Environmental
AC inputs 100 to 240 VAC, 50 or 60 Hz internal universal power supply
Power Consumption 6 watts. (max.)
Temperature Operating: 0° ~ 40° C, Storage: -10° ~ 70° C
Humidity Operating: 10% ~ 90%, Storage: 5% ~ 90%
Dimensions 440 x 140 x 44 mm (W x H x D)
EMI: C-Tick, FCC Class A, CE Mark Class A, VCCI Class A
Safety CUL, CB
Performance
Transmits Method: Store-and-forward
RAM Buffer: 512KBytes per device
Filtering Address Table: 8K entries per device
Packet Filtering/
Forwarding Rate:
10Mbps Ethernet: 14,880/pps100Mbps
Fast Ethernet: 148,800/pps
MAC Address Learning: Automatic update