NEC Server 140Rc-4 - Manual (Page 140)

4-30 Configuring Your Server
System Management
Selecting "System Management" on the Server menu shows the following screen.
See the table below for the items.
Option Parameter Description Your Setting
BIOS Version – Indicates the version of BIOS.
(Display only)
Board Part # –
Board Serial # –
Indicates the baseboard information.
(Display only)
System Part # –
System Serial # –
Indicates the system information.
(Display only)
Chassis Part # –
Chassis Serial # –
Indicates the chassis information.
(Display only)
BMC Device ID –
BMC Device Rev –
BMC Firmware Rev –
BMC BBFirmware Rev –
Indicates the BMC (Baseboard
Management Controller) information.
(Display only)
IPMI Rev – Indicates the version of Intelligent
Platform Management Interface (IPMI)
supported by BMC.
SDR Rev – Indicates the revision of SDR (Sensor
Data Record). (Display only)
PIA Rev – Indicates the revision of PIA.
(Display only)
Primary HSBP Rev – Indicates the revision of the primary
HSBP (Hot-Swap Back Plane) board
normally installed. (Display only)
[ ]: Factory-set