NEC Server 140Rc-4 - Manual (Page 78)

3-6 Setting Up Your Server
ASSEMBLING THE RACK-MOUNT SYSTEM
This subsection provides the instructions for the rack-mount server unit into a standard EIA 19-inch
rack cabinet.
This subsection also describes the removal procedures for the rack mount server unit from the 19-
inch rack cabinet.
WARNING
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-
3 to 1-8 for details.
■
Do not use any rack which does not conform to the relevant standard.
■
Disconnect the power cord(s) before installing or removing the server.
CAUTION
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
■
Do not leave more than one device being pulled out from the rack.
■
Do not lift the server only by a single person.
■
Always install the server in the specified place.
■
Do not install the server on the rack leaving the cover removed.
■
Do not pinch your finger with mechanical components.