NEC Server 140Rc-4 - Manual (Page 151)

Configuring Your Server 4-41
„ Advanced Configuration
Move the cursor onto "Advanced Configuration" and press Enter to display the following
submenu.
Advanced Configuration
Reset SCSI Bus at IC Initialization ------------------------------------------------- Enabled
Display <Ctrl><A> Message During BIOS Initialization ------------------------- Enabled
Extended Int 13 Translation for DOS Driver > 1 GByte------------------------- Enabled
POST Display Mode ------------------------------------------------------------------- Diagnostic
SCSI Controller Int 13 Support ----------------------------------------------------- Enabled
Options Listed Below Have NO EFFECT if Int 13 Support is Disabled
Domain Validation ---------------------------------------------------------------------- Enabled
Support Removable Disks Under Int 13 as Fixed Disks -------------------------- Disabled
BIOS Support for Bootable CD-ROM------------------------------------------------- Enabled