NEC Server 140Rc-4 - Manual (Page 207)

Installing and Using Utilities 6-11
NOTE: The following items of BIOS setup information will be set as
shown below.
„
LAN Controller 1 (10/100): [Enabled]
„ Serial Port A: [Enabled]
Base I/O address: [3F8]
Interrupt: [IRQ 4]
„
Serial Port B: [Enabled]
Base I/O address: [2F8]
Interrupt: [IRQ 3]
„ Serial Port Address: [On-board COM B]
„ Baud Rate: [19.2k]
„ Flow Control: [CTS/RTS]
„
Console Type: [PC ANSI]
Main Menu