Chapter 1 basic setup, What you need before you begin, Verify system requirements – NETGEAR RangeMax Next Wireless Notebook Adapter WN511T User Manual

Page 13: Observe wireless location and range guidelines, What you need before you begin -1

Advertising
background image

1-1

v2.0, February 2007

Chapter 1

Basic Setup

The NETGEAR RangeMax NEXT Wireless Notebook Adapter WN511B lets you connect a PC
computer to wireless networks. It is designed for PC computers running Microsoft Windows. For
information about product features and compatible NETGEAR products, see the NETGEAR
website at

http://www.netgear.com

.

This chapter describes how to install your Wireless Notebook Adapter and set up basic wireless
connectivity on your Wireless Local Area Network (WLAN). Advanced wireless network set up is
covered in

Chapter 1, “Network Connections and Wireless Security

.

What You Need Before You Begin

You need to verify that your computer meets the minimum system requirements and identify the
wireless network settings of the wireless network where you will connect before you can set up
your wireless PC card and connect.

Verify System Requirements

Before installing the Wireless Adapter, please make sure that these minimum requirements have
been met. You must have a computer with:

A Pentium

300 MHz or higher compatible processor with an available Cardbus slot.

A CD drive.

10 MB of free hard disk space.

Windows Vista, XP, or 2000.

Observe Wireless Location and Range Guidelines

Computers can connect over wireless networks indoors at a range which vary significantly based
on the location of the computer with the Wireless Adapter. For best results, avoid potential sources
of interference, such as:

Large metal surfaces

Microwave ovens

2.4 GHz Cordless phones

Advertising