Setting up wpa-psk security, Setting up wpa-psk security -14 – NETGEAR RangeMax Next Wireless Notebook Adapter WN511T User Manual
Page 36
NETGEAR RangeMax NEXT Wireless Notebook Adapter WN511B User Manual
1-14
v2.0, February 2007
b. Use the
icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c.
In the Security section, select WPA2-PSK [AES].
For more information about WPA2-PSK security, see the online document:
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c.
Click Close to exit the Smart Wizard.
Setting up WPA-PSK Security
Follow the steps below to configure WPA-PSK Security.
1. Run the Smart Wizard.
Figure 1-10
Note: You will not get a wireless network connection unless the SSID that you
enter exactly matches the SSID used by the access point