NETGEAR RangeMax Next Wireless Notebook Adapter WN511T User Manual
Page 37
NETGEAR RangeMax NEXT Wireless Notebook Adapter WN511B User Manual
1-15
v2.0, February 2007
a. Make sure the NETGEAR software is installed and the Wireless Notebook Adapter is
fully inserted in the Cardbus slot in your computer.
b. Use the
icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c.
In the Security section, select WPA-PSK [TKIP].
For more information on WPA security, see the online document:
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c.
Click Close to exit the Smart Wizard.
Figure 1-11
Note: You will not get a wireless network connection unless the SSID that you
enter exactly matches the SSID used by the access point