Nx Networks 3000 - Manual (Page 36)

Connecting Your 3000 Series Secure Gateway Router
22 3000 Series User Guide
2. Connect the CSU/DSU to the Frame Relay switch.
Connecting to a PC
To configure and monitor the 3000 Series through its console port, you can
connect a PC or terminal to the console port. (You can also configure and
monitor the router by connecting to its Ethernet port. See
Configuring Your
3000 Series Secure Gateway Router on page 25.)
To connect a PC or terminal locally to the gateway router, use the 9-pin to 9-
pin null modem cable that comes with the 3000 Series and, if needed, the 9-
pin to 25-pin adapter. The following figure shows how to connect a PC or
terminal directly to the 3000 Series.
1. Connect one end of the null-modem cable to the Console connector on the
back panel of your gateway router.
2. Connect the other end of the cable to your PC.
3000 Series
CSU/DSU
3000 Series
VOIC E OICE
V1 V1
D1 D1 D2 D2 D3 D3 ETH ETH
V2 V2 V3 V3 V4 V4
DATA
ALM ALM OK OK PWR PWR
Internet or
Other WAN
Frame
Relay
CSU/DSU
Internet
Service
Provider