Removing a simm – Nx Networks 3000 User Manual

Page 71

Advertising
background image

3000 Series User Guide

57

Removing a SIMM

To remove a single in-line memory module (SIMM) . . .
1. Turn off power to your 3000 Series.

2. Disconnect all network connections, including connections to the

telephone system.

3. Remove the cover by unscrewing the two screws on each side of the unit

and the three screws on the underside of the unit’s chassis and lifting off
the cover.

4. Press the detent tabs away from the center line and move the SIMM into

an upright position.

5. Remove the SIMM from its slot.

6. Install the new SIMM. See

Installing a SIMM

.

7. Replace the cover.

Be careful to line up the motherboard’s screw holes with the chassis’
screw holes.

Advertising