Nx Networks 3000 User Manual
Page 6
vi
3000 Series User Guide
three-conductor cord terminating in a molded connector body that has
an IEC CEE-22 female configuration on one end and a molded-on
tandem blade grounding type attachment plug rated 15A, 250V
configuration (6-15P) at the other end.
•
For 230 Volt Operation (other than North America ): Use a cord set
marked HAR, consisting of a minimum H05VV-F cord that has a
minimum 0.75 square millimeter diameter conductors provided with
an IEC 320 receptacle and a male plug suitable for the country of
installation.
•
This unit contains a lithium battery.
Caution
Danger of explosion if battery
is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s
instructions.