National Instruments NI sbRIO-960x - Manual (Page 2)

NI sbRIO-960x 2 ni.com
What You Need to Get Started
This section lists the software and hardware you need to start programming
the sbRIO-960x.
Software Requirements
You need a development computer with the following software installed
on it. Go to
ni.com/info and enter the info code rdsoftwareversion
for information about software version compatibility.
❑
LabVIEW
❑
LabVIEW Real-Time Module
❑
LabVIEW FPGA Module
❑
NI-RIO Software
Hardware Requirements
You need the following hardware to use the sbRIO device.
❑
sbRIO-960x
❑
19–30 VDC power supply
❑
Ethernet cable