Bluetooth, Hands-free phone system (if so equipped), System operating tips – NISSAN 2010 Frontier User Manual

Page 17: Connecting your phone

Advertising
background image

15

BLUETOOTH

®

HANDS-FREE PHONE SYSTEM (if so equipped)

With an overhead microphone and sound
transmitted through the audio system
speakers, the Bluetooth

®

Hands-free Phone

System utilizes Bluetooth

®

wireless technology

and voice recognition to provide hands-free
cellular phone communication.

SYSTeM OPeRATinG TiPS

close all windows. Surrounding noises
may interfere with system operation and
performance.

Press the

button on the steering wheel to activate voice recognition.

Wait for the tone before speaking.

Begin speaking a command within 5 seconds of the tone.

Speak in a clear and natural voice without pausing between words.

To go back to the previous command, say “Go back” or “correction.”

To cancel a voice recognition session, simply wait 5 seconds, say “cancel” or “Quit,” or
press the

button.

To increase or decrease the volume of the voice prompts, press the VOL (volume) control
button on the steering wheel or turn the POWER/VOLUME knob on the audio system while
the system is responding.

if the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.

Some commands are not available while the vehicle is in motion.

The “Help” command can be used in any menu to hear a list of available commands.

Please refer to the cellular phone manufacturer Owner’s Manual for detailed information
regarding your Bluetooth

®

phone.

For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth.

cOnnecTinG YOuR PHOne

To use the hands-free feature, you need to setup, or connect, the system to recognize your
compatible cellular phone(s). five Bluetooth

®

-enabled phones can be connected. After setup, the

system automatically connects with a connected phone when the ignition is in the Acc or On
position, as long as the phone is on and in the vehicle.

nOTe: Some cellular phones require the user to enable the automatic reconnection feature. Please
refer to the cellular phone manufacturer’s Owner’s Manual for Bluetooth

®

setup information.

Bluetooth

®

controls location

Advertising