NISSAN 2010 Frontier - Manual (Page 9)

7
04
SCAN/RPT BUTTON
Press the SCAN/RPT button to stop at each broadcasting station (fM, AM or XM ® ) for
5 seconds. Pressing the button again during this 5-second period will stop scan tuning
and the radio will remain tuned to that station. if the SCAN/RPT button is not pressed
within 5 seconds, scan tuning moves to the next station.
05
CAT/FOLDER BUTTON
To manually tune the radio, press the CAT/FOLDER button.
When the CAT/FOLDER button is pressed while a cd is playing, it will fast forward
or rewind. When the button is released, the cd will play at normal speed.
MP3 PLAYBACK (if so equipped)
in addition to playing audio cds, the audio system can play MP3 files recorded on
cd-ROM, cd-R, and cd-RW discs. each disc can have a maximum of 8 folder
levels and 255 folders. A total of 512 MP3 files can be played back. during MP3
playback, some recorded id3 tag information can be displayed by pressing the DISP
CLOCK button. use the CAT/FOLDER button to navigate the MP3 folders.
06
EJECT BUTTON
EJECT A SINGLE DISC - Press the button for less than 1.5 seconds. Select the
eject slot by pressing the cd insert select button (1 - 6 ). The cd will then eject.
EJECT ALL DISCS - Press and hold the button for more than 1.5 seconds.
The cds will be ejected one after another.
07
TUNING AND AUDIO CONTROL KNOB (Bass, Treble, etc.)
To manually tune the radio, turn the TUNE knob. To adjust the Bass, Midrange, Treble,
fade, Balance, and Speed Sensitive Volume (SSV) (if so equipped), press the AUDIO
knob until the desired mode appears in the display. Then turn the TUNE knob to adjust
to the desired level.
08
STATION AND CD SELECT BUTTONS
To store a station in a preset you must first select A, B, or c memory bank by pressing
the PRESET A·B·C button and tune to the desired fM, AM or XM ® station. Then
press and hold the desired station select button for at least 2 seconds. When the
preset indicator illuminates, a beep will sound, indicating memorization is complete.
To retrieve a previously set station, select the memory bank where the preset was set,
then press the corresponding station select button.
While playing a cd, to select a different cd loaded into the cd changer; press one
of the cd select buttons (1 - 6).
09
LOAD BUTTON
LOAD A SINGLE DISC - Press the
button for less than 1.5 seconds. Select the
loading slot by pressing one of the cd insert select buttons (1 - 6), then insert the cd.
LOAD UP TO 6 DISCS - Press and hold the
button for more than 1.5 seconds. The
slot numbers (1-6) will illuminate on the display when cds are loaded into the changer.
*XM ® Satellite Radio is only available on vehicles equipped with optional XM ® satellite
subscription service.