Touch screen, Mic test, How to calibrate the touch screen – Nintendo DSi User Manual

Page 36: Testing the microphone

Advertising
background image

Tap

straight

down!

The icon will turn yellow

when you tap it.

69

Applic

ations & S

ettings

70

Applic

ations & S

ettings

Parental Controls (cont.)

What to do if you forget your PIN and secret-question answer…

If you forget both your PIN and the answer to your secret question, please follow these steps.

On the PIN input screen, select I Forgot.

On the next screen, enter the answer to your

secret question.

If you successfully answer the secret question,

proceed with editing your Parental Controls

settings.

If you’ve forgotten the answer to your secret question.

Select I Forgot.

Check Inquiry Number – Please call Nintendo

Customer Service at 1-800-255-3700 and provide

the inquiry number shown here, and the date that

is set on your Nintendo DSi. You will then be

issued a master key.

Tap OK.


Enter the master key and select OK.

Master key

Inquiry number

Touch Screen

If the Touch Screen is not responding properly or if you feel the stylus contact point is not aligned correctly,
take the following steps to recalibrate the Touch Screen.
In the event you are unable to use the stylus at all, press and hold the L Button, R Button, and START, then turn
the power on. The calibration screen will be the first screen to display.

How to Calibrate the Touch Screen

Carefully tap the center of .

Calibration points will appear in the upper left

corner, lower right corner, and the center of the

screen. Tap each point to complete calibration.

When Calibration complete appears on the

screen, tap each of the four to confirm.

When you’ve finished confirming calibration,

tap OK to finish.

If you were unable to accurately tap , select

Try Again to restart the calibration process.

Mic Test

Confirm that the microphone is operating properly.

Testing the Microphone

Face the microphone and speak.

Confirm that the volume bar is filling up with

colored bands.

The volume bar will fill with colored

bands when it picks up sound

Tap Quit when you’ve finished confirming that the mic is working.

Advertising