Access point steps, Internet setup (cont.) advanced setup, How to connect – Nintendo DSi User Manual

Page 42

Advertising
background image

81

Applic

ations & S

ettings

82

Applic

ations & S

ettings

If the connection test is successful, settings are complete.

Immediately after completing settings using WPS, connection may fail due to the

restarting of the access point. Wait a short time, then try performing a connection test again.

Tap the connection type best suited for your
access point

Access point steps

Push-Button Connection

PIN connection

Continue to push the WPS Button
until the lamp blinks

Set the PIN number displayed on the
Nintendo DSi screen in your access point

It may take as long as 2 minutes until setup completes.

Tap Next

Tap OK to perform a connection test

Internet Setup (cont.)

Advanced Setup

(See glossary, page 107 for definition of terms)

Advanced Setup allows settings for connecting to the Internet using Nintendo DSi exclusive or Nintendo DSi
compatible software, using higher security than WPA, proxy settings and settings for connecting with WPS.
Advanced Setup (connections 4 – 6) cannot be used with DS-exclusive software. When connecting to the
Internet with DS-exclusive software, configure normal Internet settings (connections 1 – 3).

How to Connect

Tap Connection Settings

Tap Advanced Setup

Tap a connection labeled None

Tap the connection method best-suited for your

connection environment

• To set up using WPS

Tap the WPS icon and proceed from step .

• Searching for an access point. See page 77.

• Manual setup *The following instructions are the same as for configuring normal settings.

See page 79.

Advertising